江西吉安人，中共党员，湖南大学和McMaster University联合培养博士，Kyushu University博士后研究员及助理教授，现任湖南大学材料科学与工程学院副教授、博士生导师，青年教师托举计划，担任JMA、MRL、IJMMM、金属学报、有色金属工程和矿冶工程期刊（中）青年编委以及J. Mater. Sci. Technol., J. Magnes. Alloy., Mater. Des., Materialia, J. Alloys Compd., Mater. Sci. Eng. A和Metall. Mater. Trans. A等知名期刊及国家自然科学基金等通信评审专家。主要研究方向包括金属材料先进制备与加工及AI+增材制造合金设计等，获得2023年中国有色金属工业科学技术奖一等奖（排名第1）和湖南省科技进步二等奖（排名第2），入选湖南省“荷尖”人才（湖湘青年英才）和湖南省普通高校青年骨干教师，主持“慧眼行动”项目、国家自然科学基金面上项目、青年基金项目、湖南省自然科学基金青年项目等十余项，曾作为主要参与人完成了“973”项目子课题、科技部国际合作计划项目、国家自然科学基金、教育部博士点基金及日本学术振兴会（JSPS）重点基础研究项目等。已在国内和国际相关领域知名学术期刊上发表论文100余篇，包括Nature Commun. , Mater. Today, Int. J. Plast., Int. J. Extreme Manuf., Virtual Phys. Prot., Scripta Mater.等。主讲“金属塑性加工原理”、“材料性能学”“变形体物理学”等本科、研究生课程，主持湖南省一流本科生课程1门、研究生拔尖创新人才联合培养基地项目1项和湖南省教改项目1项，参与一门湖南省一流本科生课程建设，参与教育部和湖南省教改课题各一项，获湖南省教学成果奖一等奖和二等奖各1项，湖南大学教学成果一等奖2项，每年指导1-2项本科生SIT项目（包括国家级、省级、校级），指导多名本科生参加各类全国学科竞赛，获得全国大学生金相技能大赛个人一等奖、团体二等奖，中国大学生材料热处理创新创业大赛一等奖等多项奖励。

邮箱：jfling2820@163.com;fulin.jiang.88@hnu.edu.cn；

地址：湖南大学 材料科学与工程学院 314 房间（湖南省长沙市岳麓区麓山南路1号 邮编：410082）

2013年–2015年：McMaster University（加拿大）,材料科学与工程,博士联合培养,导师: G.R. Purdy和H.S. Zurob教授

2012年–2015年：湖南大学,材料科学与工程,博士,导师:张辉 教授

2010年–2012年：湖南大学,材料科学与工程,硕士（硕博连读）导师:张辉 教授

2006年–2010年：湖南大学,材料成型及控制工程,学士（推荐免试研究生）

2020年–至今,湖南大学,材料科学与工程学院,副教授 、博士生导师

2019年–2020年,湖南大学,材料科学与工程学院,助理教授 、硕士生导师

2016年–2018年：Kyushu University（日本）,博士后研究员、助理教授,合作导师: S. Takaki和T. Tsuchiyama教授

[1]国家自然科学基金面上项目（52174361）：奥氏体钢位错与运动型障碍物协同强韧化机理及调控基础研究，2022-2025，在研，主持。

[2]国家自然科学基金青年基金项目(51904099):基于XRD线形宽化分析的Al-Zn-Mg-Cu合金塑性晶格各向异性研究，2020/01-2022/12，已结题，主持。

[3]湖南省自然科学基金青年基金项目(2020JJ5062)：塑性变形方式对高锰TWIP钢晶格各向异性的影响及其强化机理研究，2020/01-2021/12，已结题，主持。

[4]湖南省高新技术产业科技创新引领计划（2022GK4051）：新一代高端通信装备用高成形性颗粒增强铝基复合材料制备核心技术及产业化，2022年-2024年，在研，子课题主持。

[5]湖南省省重点研发计划（2023GK2079）：铝合金连续铸造-连续剪切挤压技术及应用，2023年-2025年，在研，子课题主持。

[6]中国科学院高能物理研究所（H202191480579）：原位变温电阻率测试系统，2021-2022，已结题，主持。

[7]凝固技术国家重点实验室（西北工业大学）开放课题(SKLSP202212):原位合金化增材制造Ti-6Al-4V合金凝固行为及组织性能研究, 2022-2023，在研，主持。

[8]上海电缆研究所有限公司：高强高导铝合金研究开发，2022-2024，在研，主持。

[9]湖南大学科研启动经费及人才项目(531118010353):基于定量位错分析的立方金属材料强韧化机理研究，2019/03-2022/12，已结题，主持。

[10]华中科技大学材料成形与模具技术国家重点实验室开放基金课题（P2022-015）：高性能Al-Mg-Si合金连续扩展挤压工艺及组织性能研究，2022年-2023年，在研，主持。

[11]宁夏智能装备CAE重点实验室开放基金项目(KFYB2019002):基于位错理论的铝合金连续大塑性变形本构模型及模拟研究，2019/12-2020/12，已结题，主持。

[12]国家自然科学基金面上项目（52074114）：连续扭转挤压大塑性变形新方法制备高性能Mg-Al-Zn合金基础研究，2021-2024，在研，参与。

[13]湖南省科技计划项目-产学研结合专项-战略性新兴产业重大科技成果转化类（2019GK4045）：高品质铝合金细化材料-稀土铝钛硼材料重大核心技术开发与产业化，2019-2021，已结题，参与。

ORCID ID:https://orcid.org/0000-0002-2430-5867

Researchgate:https://www.researchgate.net/profile/Fulin_Jiang

自2019年起部分代表作（“*”：通讯作者）：

39.Jinlong Su,Fulin Jiang *, Jin Wu, Yuehua Li, Ri Han, Lu Wang, Raymond Chung, Wen Wong, Jian Wang, Swee Leong Sing *, Machine Learning Driven Discovery of Low Modulus Biomedical Titanium Alloys Designed for Additive Manufacturing,Nature Communications(2026) https://doi.org/10.1038/s41467-026-71927-6

38. Jinlong Su, Lequn Chen, Steven Van Petegem,Fulin Jiang *, Qinzhi Li, Junhua Luan, Swee Leong Sing, Jian Wang, Chaolin Tan *, Additive manufacturing metallurgy guided machine learning design of versatile alloys,Materials Today88 (2025) 240–2. https://doi.org/10.1016/j.mattod.2025.06.031

37. Yang Mo, Jinlong Su *, Shudong He, Jialin Yang, Hang Xu, Jie Teng, Hui Zhang,Fulin Jiang *, Insights into the texture-dependent strain hardening mechanisms of conform-processed AZ31 Mg alloys_ Experimental investigations and VPSC modeling,Journal of Magnesium and Alloys(2026) https://doi.org/10.1016/j.jma.2026.102024

36. Yang Mo, Jinlong Su *, Qinzhi Li,Fulin Jiang *, Swee Leong Sing *, Machine learning-driven design of support structures and process parameters in additive manufacturing,VIRTUAL AND PHYSICAL PROTOTYPING, 20 (2025), e2525988.

35. Jinlong Su, Yang Mo, Peijie Shangguan, Chinnapat Panwisawas,Fulin Jiang *, Swee Leong Sing *, Additive manufacturing-by-design for support structures a critical review,Int. J. Extrem. Manuf.7 (2025) 052002.

34. Jin-Long Su,Fu-Lin Jiang*, Jie Teng* , Le-Qun Chen, Guillermo Requena, Ming Yan, Lai-Chang Zhang, Y. Morris Wang, Ilya V. Okulov, Hong-Mei Zhu, Guo-Wei Bo, You-Xiang Chew* , Chao-Lin Tan*, Laser additive manufacturing of titanium alloys process, materials and post-processing,Rare Met.(2024) 43(12):6288–6328.

33. Hang Xu, Yang Mo,Fulin Jiang∗, Luoyi Wu, Jie Tang, Jie Teng, Hui Zhang, The post-deformation softening and hardening mechanisms of a Mg-2Y-1Zn alloy during double-stage hot compression,Journal of Magnesium and Alloys13 (2025) 4530–4543.

32. Yanjie Sun, Y.J. Wang, X.Z. Zhang, S.L. Yang *,Fulin Jiang∗, Improving mechanical properties of the Al–Si coated press-hardened steel self-fusion joint by utilizing dual-beam laser welding,Optics & Laser Technology192 (2025) 114026.

31.Fulin Jiang *, Setsuo Takaki, Takuro Masumura, Ryuji Uemori, Hui Zhang, Toshihiro Tsuchiyama *, Nonadditive strengthening functions for cold-worked cubic metals: Experiments and constitutive modeling,International Journal of Plasticity129 (2020) 102700.

论文的中文介绍链接：https://mp.weixin.qq.com/s/Y_TBIQUz85cHN_X9hEOAOQ or http://clxy.hnu.edu.cn/info/1067/3746.htm

30.Jie Tang,Fulin Jiang *, Chunhui Luo, Guowei Bo, Kunyang Chen, Jie Teng, Dingfa Fu, Hui Zhang *, Integrated physically based modeling for the multiple static softening mechanisms following multi-stage hot deformation in Al-Zn-Mg-Cu alloys,International Journal of Plasticity134 (2020) 102809.

29. Jinlong Su,Fulin Jiang ∗, Jie Teng ∗, Lequn Chen, Ming Yan, Guillermo Requena, Lai-Chang Zhang, Y Morris Wang, Ilya V Okulov, Hongmei Zhu, Chaolin Tan ∗, Recent innovations in laser additive manufacturing of titanium alloys，International Journal of Extreme Manufacturing6 (2024) 032001(36pp). https://doi.org/10.1088/2631-7990/ad2545

28. Jie Tang, Mingcai Liu, Guowei Bo,Fulin Jiang ∗, Chunhui Luo, Jie Teng ∗, Dingfa Fu, Hui Zhang∗,Unraveling precipitation evolution and strengthening function of the Al-Zn-Mg-Cu alloys with various Zn contents: Multiple experiments and integrated internal-state-variable modeling,Journal of Materials Science & Technology116 (2022) 130-150.

27. Jin Liu, Zhiyong Du, Jinlong Su, Jie Tang∗,Fulin Jiang∗, Dingfa Fu, Jie Teng, Hui Zhang∗, Effect of quenching residual stress on precipitation behaviour of 7085aluminium alloy,Journal of Materials Science & Technology132 (2023) 154–165.

26.Ruiqing Lu, Shuwei Zheng, Jie Teng*, Jiamin Hu, Dingfa Fu, Jianchun Chen, Guodong Zhao,Fulin Jiang*, Hui Zhang, Microstructure, mechanical properties and deformation characteristics of Al-Mg-Si alloys processed by a continuous expansion extrusion approach,Journal of Materials Science & Technology80(30) (2021) 150-162.

25. Longqing Tang, Guowei Bo,Fulin Jiang *, Shiwei Xu *, Jie Teng, Dingfa Fu, Hui Zhang *, Unravelling the precipitation evolutions of AZ80 magnesium alloy during non-isothermal and isothermal processes,Journal of Materials Science & Technology75 (2021) 184-195.

24. Jinlong Su, Xiankun Ji, Jin Liu, Jie Teng *,Fulin Jiang *, Dingfa Fu, Hui Zhang *, Revealing the decomposition mechanisms of dislocations and metastable α' phase and their effects on mechanical properties in a Ti-6Al-4V alloy,Journal of Materials Science & Technology, 107 (2022) 136–148. https://doi.org/10.1016/j.jmst.2021.07.048.

23. Ruiqing Lu #, Zhiming Xu #,Fulin Jiang∗, Shiwei Xu ∗, Dingfa Fu, Hui Zhang, Jie Teng ∗,Revealing the grain size dependent hot workability and deformation mechanisms in a Mg-Zn-Y alloy,Journal of Magnesium and Alloys, 11 (2023) 1461–1471. https://doi.org/10.1016/j.jma.2021.08.001

22. Yang Mo,Fulin Jiang *, Hang Xu, Jie Tang, Dingfa Fu, Hui Zhang*, Jie Teng*, Deformation mechanisms and microstructural characteristics of AZ61 magnesium alloys processed by a continuous expansion extrusion approach,Journal of Magnesium and Alloys(2024) 2826–2846.https://doi.org/10.1016/j.jma.2022.11.019

21. Tian Zhang, Jie Tang, Shudong He,Fulin Jiang *, Dingfa Fu, Jie Teng, Jian Wang*, Kinematical barriers enhanced dislocation strengthening mechanisms in cold-worked austenitic steels,Scripta Materialia226 (2023) 115237. https://doi.org/10.1016/j.scriptamat.2022.115237

20. J.L. Su,F.L. Jiang, C.L. Tan *, F. Weng, F.L. Ng, M.H. Goh, H.M. Xie, J. Liu, Y.X.Chew *, J. Teng *, Additive manufacturing of fine-grained high-strength titanium alloy via multi-eutectoid elements alloying,Composites Part B: Engineering249 (2023) 110399.https://doi.org/10.1016/j.mtcomm.2022.104724

19. Jinlong Su, Haiming Xie, Chaolin Tan, Zili Xu, Jin Liu,Fulin Jiang *, Jie Tang, Dingfa Fu, Hui Zhang *, Jie Teng *, Microstructural characteristics and tribological behavior of an additively manufactured Ti-6Al-4V alloy under direct aging and solution-aging treatments,Tribology International175 (2022) 107763.

18. Jinlong Su,Fulin Jiang *, Junjie Li, Chaolin Tan, Zili Xu, Haiming Xie, Jin Liu, Jie Tang, Dingfa Fu, Hui Zhang, Jie Teng*, Phase transformation mechanisms, microstructural characteristics and mechanical performances of an additively manufactured Ti-6Al-4V alloy under dual-stage heat treatment,Materials & Design223 (2022) 111240.

17. Zeye Chen, Ruiqing Lu, Shuwei Zheng, Jie Tang*,Fulin Jiang *, Lei Deng, Liang Huang, Jie Teng*, Microstructural characteristics and deformation behaviors of an Al–Mg–Si alloy with improved strength and conductivity processed by continuous casting and expansion extrusion,Journal of Materials Research and Technology2023;22:445-460. https://doi.org/10.1016/j.jmrt.2022.11.156

16. Luoyi Wu #,*, Yu’an Li #, Yingliang Cheng, Feng Linghu,Fulin Jiang, Gang Chen, Jie Teng, Dingfa Fu*, Hui Zhang*, Microstructure evolution and corrosion resistance improvement of Mg–Gd–Y–Zn–Zr alloys via surface hydrogen treatment,Corrosion Science191 (2021) 109746.

15. Xiang DAI,Fu-lin JIANG *,Jin LIU, Luo-yi WU, Ding-fa FU, Jie TENG, Hui ZHANG, Strain anisotropy models for refined diffraction line profile analysis in cubic metals,Trans. Nonferrous Met. Soc. China30(2020) 2090−2106.

14. Shang Xu,Fulin Jiang *, Fengmei Gao, Lin Wang, Jie Teng, Dingfa Fu, Hui Zhang, Weiyou Yang, Shanliang Chen *, Single-crystal Integrated Photoanodes Based on 4H-SiC Nanohole Arrays for Boosting Photoelectrochemical Water Splitting Activity,ACS Applied Materials & Interfaces, 2020, 12, 20469-20478.

13.Jin Liu,Fulin Jiang∗, Minzhen Tang, Binbin Liu, Yishan Sun, Hui Zhang∗, Reduced residual stress and retained properties in Al-Zn-Mg-Cu alloys using a novel cladding quenching process,Journal of Materials Research and Technology9 (2020) 7201-7209.

12. Guowei Bo,Fulin Jiang*, Huaguang Su, Luoyi Wu, Jie Teng, Dingfa Fu, Hui Zhang *, Static softening behavior and modeling of an Al–Cu–Mg–Zr alloy with various pre-precipitation microstructures during multistage hot deformation,Materials Science and Engineering: A778 (2020) 139094.

11.Fulin Jiang*, Takuro Masumura, Kentaro Hirata, Toshihiro Tsuchiyama, Setsuo Takaki, A new diffraction line profile breadth analysis approach for evaluating plastic lattice strain anisotropy in cold-worked nickel under various strain paths,International Journal of Plasticity112 (2019) 89-107.

10. Jinlong Su #, Xiankun Ji #, Haiming Xie, Jie Tang,Fulin Jiang *, Dingfa Fu, Jie Teng *, Hui Zhang *, Constitutive and microstructural characteristics of Ti-5Al-2.5Sn alloy during isothermal and non-isothermal multi-stage hot deformation across different phase regions,Journal of Alloys and Compounds, 2022,https://doi.org/10.1016/j.jallcom.2022.164647

9.Kunyang Chen, Jie Tang,Fulin Jiang*, Jie Teng, Dingfa Fu, Hui Zhang*, The role of various Zr additions in static softening behavior of Al-Zn-Mg-Cu alloys during interval holding of double-stage hot deformation,Journal of Alloys and Compounds792 (2019) 1112-1121.

8.Fulin Jiang, Takuro Masumura, Toshihiro Tsuchiyama *, Setsuo Takaki, Effect of substitutional element addition on Hall-Petch relationship in interstitial free ferritic steels,ISIJ International59(10) (2019) 1929-1931.

7.Jie Tang, Hui Zhang *, Jie Teng, Dingfa Fu,Fulin Jiang *, Effect of Zn content on the static softening behavior and kinetics of Al-Zn-Mg-Cu alloys during double-stage hot deformation,Journal of Alloys and Compounds806 (2019) 1081-1096.

6.Xinrong Chen, Zhiming Xu, Dingfa Fu, Hui Zhang, Jie Teng *,Fulin Jiang *, Comparative Hot Workability Characteristics of an Al–Si/SiCp Aluminium Matrix Composite Hybrid Reinforced with Various TiB 2 Additions,Metals and Materials International(2020): 1-12.

5.Xiankun Ji, Hong Yu, Baoqi Guo,Fulin Jiang, Dingfa Fu, Jie Teng, Hui Zhang *, John J. Jonas, Post-dynamic α to β phase transformation and reverse transformation of Ti-5Al-3V alloy after hot deformation in two phase region,Materials & Design188 (2020) 108466.

4.Huan Cai, Jiamin Hu,Fulin Jiang, Dingfa Fu *, Jie Teng, Hui Zhang *, A novel repetitive continuous welding extrusion for refining grain size and evading strength-ductility trade-off in AZ31 magnesium alloy,Materials Science and Engineering: A753 (2019) 192-196.

3.Guowei Bo,Fulin Jiang, Zhaoyu Dong, Guan Wang, and Hui Zhang *, Revealing the influence of pre-precipitation microstructure on hot workability in an Al-Cu-Mg-Zr alloy,Materials Science and Engineering: A755 (2019) 147-157.

2.Longqing Tang,Fulin Jiang, Jie Teng *, Dingfa Fu, Hui Zhang *, Strain path dependent evolutions of microstructure and texture in AZ80 magnesium alloy during hot deformation,Journal of Alloys and Compounds, 806 (2019) 292-301.

1.Xiankun Ji, Baoqi Guo,Fulin Jiang, Hong Yu, Dingfa Fu, Jie Teng, Hui Zhang *, John J. Jonas, Accelerated flow softening and dynamic transformation of Ti-6Al-4V alloy in two-phase region during hot deformation via coarsening α grain,Journal of Materials Science & Technology, 36 (2020) 160–166.

2019年之前代表性论文（“*”：通讯作者）：

1.Fulin Jiang, Hatem S. Zurob, Gary R. Purdy, Xiang Wang, Hui Zhang, Characterization of the isothermal precipitation kinetics of an Al-Zn-Mg-Cu alloy, Metallurgical and Materials Transactions A 49(10) (2018) 5157-5168.

2.Fulin Jiang, Hui Zhang, Xianna Meng, Luoxing Li, Effects of Ti addition on the microstructures and mechanical properties of the Al-Mn-Mg-RE alloy, Materials & Design 55 (2014) 280-285.

3.Fulin Jiang, Hui Zhang, Non-isothermal precipitation kinetics and its effect on hot working behaviors of an Al-Zn-Mg-Cu alloy, Journal of Materials Science 53 (4) (2018) 2830-2843.

4.Fulin Jiang, Hatem S. Zurob, Gary R. Purdy, Hui Zhang, Static softening following multistage hot deformation of 7150 aluminum alloy: experiment and modeling, Materials Science & Engineering A 648 (2015) 164-177.

5.Fulin Jiang, Hui Zhang, Luoxing Li, Jianghua Chen, The kinetics of dynamic and static softening during multistage hot deformation of 7150 aluminum alloy, Materials Science & Engineering A 552 (2012) 269- 275.

6.Fulin Jiang, Hui Zhang, Xiankun Ji, Xianna Meng, Luoxing Li, Comparative hot deformation characters of Al-Mn-Mg-RE alloy and Al-Mn-Mg-RE-Ti alloy, Materials Science & Engineering A 595(10) (2014) 10-17.

7.Fulin Jiang, Hui Zhang, Jian Su, Yishan Sun, Constitutive characteristics and microstructure evolution of 7150 aluminum alloy during isothermal and non-isothermal multistage hot compression, Materials Science & Engineering A 636 (2015) 459-469.

8.Fulin Jiang, Hatem S. Zurob, Gary R. Purdy, Hui Zhang, Characterizing precipitate evolution of an Al-Zn-Mg-Cu-based commercial alloy during artificial aging and non-isothermal heat treatments by in situ electrical resistivity monitoring, Materials Characterization 117 (2016) 47-56.

9.Fulin Jiang *, Kentaro Hirata, Takuro Masumura, Toshihiro Tsuchiyama, Setsuo Takaki, Effect of the surface layer strained by mechanical grinding on X-ray diffraction analysis, ISIJ International 58(2) (2018) 376-378.

10.Fulin Jiang, Jie Tang, Dinfa Fu, Jianping Huang, Hui Zhang, A Correction to the Stress-Strain Curve During Multistage Hot Deformation of 7150 Aluminum Alloy Using Instantaneous Friction Factors, Journal of Materials Engineering and Performance 27 (2018) 3083-3090.

11.Fulin Jiang, Hui Zhang, Shuchu Weng, Dingfa Fu, Characterization of dynamic microstructural evolution of 7150 aluminum alloy at high strain rate during hot deformation, Trans. Nonferrous Met. Soc. China 26 (1) (2016) 51-62.

12.Setsuo Takaki,Fulin Jiang *, Takuro Masumura, Toshihiro Tsuchiyama, Correction of elastic anisotropy in Williamson-Hall plots by diffraction Young’s modulus and direct fitting method, ISIJ International 58(4) (2018) 769-775.

13.Setsuo Takaki, Takuro Masumura,Fulin Jiang *, Toshihiro Tsuchiyama, Effect of instrumental correction on X-ray line profile analysis in cold rolled ferritic steel, ISIJ International 58(6) (2018) 1181-1183.

14.Hui Zhang,Fulin Jiang, Xiaoyang Shang, Luoxing Li, Flow stress and microstructural evolution of the horizontal continuous casting Al-0.96Mn-0.38Si-0.18Fe alloy during hot compression, Materials Science & Engineering A 571 (2013) 25-32.

15.Yishan Sun,Fulin Jiang, Hui Zhang, Jian Su, Wuhua Yuan, Residual stress relief in Al-Zn-Mg-Cu alloy by a new multistage interrupted artificial aging treatment, Materials & Design 92 (2016) 281-287.

16.Setsuo Takaki, Daichi Akama,Fulin Jiang, Toshihiro Tsuchiyama, Correction of the Williamson-Hall Plots by the Diffraction Young’s Modulus, Journal of the Society of Materials Science, Japan 67 (3) (2018) 383-388.

17.Setsuo Takaki, Takuro Masumura,Fulin Jiang, Toshihiro Tsuchiyama, Relation between elastic constants and elastic anisotropy in metals, Journal of the Society of Materials Science, Japan 67(9) (2018) 855-860.

18.Xiankun Ji, Hui Zhang, Song Luo,Fulin Jiang, Dingfa Fu, Microstructures and properties of Al-Mg-Si alloy overhead conductor by horizontal continuous casting and continuous extrusion forming process, Materials Science & Engineering A 649 (2016) 128-134.

19.Can Liu, Hui Zhang,Fulin Jiang, Characterization of dynamic microstructure evolution during hot deformation of the Al-4.10Cu-1.42Mg-0.57Mn-0.12Zr alloy, Trans. Nonferrous Met. Soc. China 24 (2014) 3477-3485.

20.Jiamin Hu, Jie Teng, Xiankun Ji, Xiangxin Kong,Fulin Jiang, Hui Zhang, Microstructural Characteristic of the Al-Fe-Cu Alloy During High-Speed Repetitive Continuous Extrusion Forming, Journal of Materials Engineering and Performance 25(11) (2016) 4769-4775.

21.Setsuo Takaki, Takuro Masumura,Fulin Jiang, Toshihiro Tsuchiyama, Evaluation of Dislocation Density in Cold Worked Low Carbon Ferritic Steel, Tetsu-to-Hagané(Journal of the Iron and Steel Institute of Japan), 104 (11), (2018) 683-688.

22.Takuro Masumura, Setsuo Takaki,Fulin Jiang, Toshihiro Tsuchiyama, Discussion about procedure for determining parameter α in Modified Williamson-Hall method, Tetsu-to-Hagané(Journal of the Iron and Steel Institute of Japan), 104(11), (2018) 717-719.

国内及国际际会议:

1.Fulin Jiang,Hatem S. Zurob, Gary R. Purdy, Hui Zhang, edited by: Matthias Militzer, Gianluigi Botton, Long-Qing Chen, James Howe, Chadwick Sinclair, and Hatem Zurob. In situ characterization of precipitate formation and dissolution in an Al-Zn-Mg-Cu alloy by electrical resistivity measurement, International Conference on Solid-Solid Phase Transformations in Inorganic Materials (PTM-2015), 06 (2015) 727-734. (Whistler, Canada)

2.T. Tsuchiyama, Y. Ono,Fulin Jiang, S. Takaki, Effect of Chemical Composition on the Ductile-to-Brittle Transition on Fe-Mn-C Ternary Alloy, ICAS 2016 & HMnS (2016) 57-59. (Chengdu, China)

3.Fulin Jiang,D. Akama, T. Tsuchiyama, S. Takaki, Role of silicon addition in grain refinement strengthening of ferritic steel, CAMP-ISIJ 30 (2017) 368. (Tokyo, Japan)

4.Fulin Jiang,K. Hirata, T. Tsuchiyama, S. Takaki, Correlation between grain boundary segregation and Hall-Petch coefficient in Fe-Si steels, CAMP-ISIJ 30 (2017) 867. (Sapporo, Japan)

5.K. Hirata,Fulin Jiang,T. Tsuchiyama, S. Takaki, Effect of annealing time on yield strength of Fe-3mass% Si ferritic steel, CAMP-ISIJ 30 (2017), 866. (Sapporo, Japan)

6.Fulin Jiang, Setsuo Takaki, Daichi Akama, Toshihiro Tsuchiyama, Direct correction of the elastic anisotropy in Williamson-Hall plots for cold worked metals, EUROMAT-2017 (2017). (Thessaloniki, Greece).

7.Setsuo Takaki,Fulin Jiang, Daichi Akama, Toshihiro Tsuchiyama, Application of direct fitting method to the modified Williamson-Hall method, EUROMAT-2017 (2017). (Thessaloniki, Greece)

8.Takuro Masumura,Fulin Jiang, Setsuo Takaki, Daichi Akama, Toshihiro Tsuchiyama, Evaluation of dislocation density in cold worked austenitic steel SUS316L, EUROMAT-2017 (2017). (Thessaloniki, Greece).

9.蒋福林，滕杰，傅定发，张辉，基于原位电阻率表征Al-Zn-Mg-Cu 合金析出动力学，中国材料大会（四川成都）2019.7.

10. 季显坤，虞洪，蒋福林，傅定发，滕杰，张辉, 初始α 晶粒尺寸对Ti-6Al-4V 合金在两相区热变形行为及动态相变的影响, 中国材料大会（四川成都）2019.7.

11. 汤杰，陈坤阳，蒋福林，滕杰，傅定发，张辉， Zr 含量对Al-Zn-Mg-Cu 合金双道次热变形静态软化机制的影响，中国材料大会（四川成都）2019.7.

申请专利：

1. 张辉，孙轶山，蒋福林，袁武华. 一种保持铝合金强度降低淬火残余应力的时效热处理方法. ZL 2015 1 0295203.2.

2. 张辉，苏剑，蒋福林，孙轶山. 一种降低Al-Mg-Si合金板材各向异性的工艺方法. ZL 2015 1 0336976.0.

3.吴落义，李裕安，令狐锋，蒋福林，陈刚，李泽熙，刘津男，廖志彬，李永康,改善LPSO增强镁合金耐蚀性的氢化热处理方法及合金, ZL 2020 1 1054847.X.

[1]2017年11月： 湖南大学优秀博士论文；

[2]2019年11月： 湖南大学新聘教师入职培训微格演练二等奖；

[3]2021年07月： 湖南大学青年教师托举计划;

[4]2021年12月： 湖南大学2020-2021学年度“优秀班主任”；

[5]2022年01月： 湖南大学教学成果奖（本科类）一等奖；

[6]2022年05月： 湖南省高等教育教学成果奖 二等奖；

[7]2022年11月： 湖南省普通高校青年骨干教师；

[8]2023年07月： 湖南省“荷尖”人才（湖湘青年英才）；

[9]2023年12月：中国有色金属工业科学技术奖一等奖（排名第1）；

[10]2024年08月： 湖南大学教学成果奖（本科类）一等奖；

[11]2024年09月： 湖南省科技进步二等奖（排名第2）；

[12]2025年12月：湖南省高等教育教学成果奖 一等奖（排名第3）；

[13]2025年12月：中国有色金属学会第五届NFSOC教学成果奖一等奖（排名第6）